Author Topic: V Belts  (Read 1001 times)

spastk

  • Administrator
  • Needs to spend more time in the garage
  • Posts: 1443
    • MSN Messenger - aaron.barnes@hbcosmo.com
V Belts
« on: September 14, 2007, 04:10:23 AM »
(Gates #'s)

MA engine:

Fan & Alt w/o AC - 13A0980
Fan & Alt w/ AC - 13A0940
Power Steering - 13A0990
Air Conditioning - 13A0925


FE engine (export):

Fan & Alt - 13A0760
Power Steering - 13A0850
Air Conditioning - 13A0925


FE engine (jdm):

Fan & Alt - 13A0925
Power Steering - 13A0840
Air Conditioning - 13A0915


12A engine:

Fan & Alt - 11A0800
Power Steering - 11A0915 or 13A0940 or 13A1080
Air Conditioning - varies
Air Pump - 11A0825 or 11A0925


13B engine:

Fan & Alt - 11A0800
Power Steering - 13A0940
Air Conditioning - 13A0915
Air Pump - 11A0965
[SPASTK] 1983 Mazda Cosmo Coupe

6330

  • Greasemonkey
  • Posts: 24
V Belts
« Reply #1 on: December 28, 2008, 07:22:12 AM »
Quote from: spastk
(Gates #'s)

MA engine:

Fan & Alt w/o AC - 13A0980
Fan & Alt w/ AC - 13A0940
Power Steering - 13A0990
Air Conditioning - 13A0925


FE engine (export):

Fan & Alt - 13A0760
Power Steering - 13A0850
Air Conditioning - 13A0925


FE engine (jdm):

Fan & Alt - 13A0925
Power Steering - 13A0840
Air Conditioning - 13A0915


12A engine:

Fan & Alt - 11A0800
Power Steering - 11A0915 or 13A0940 or 13A1080
Air Conditioning - varies
Air Pump - 11A0825 or 11A0925


13B engine:

Fan & Alt - 11A0800
Power Steering - 13A0940
Air Conditioning - 13A0915
Air Pump - 11A0965

Mine is a 1986 Australian delivered 929 FE20.(NA)
The part numbers for the belts are as follows.
(After taking back 3 different belts because nothing i'd bought fit)

Fan & Alt - 13C0915
Power Steering - 13AV0850
Air Conditioning - 13AV0925

These are the part numbers on the belts that were fitted to the car when I bought it.
Are the part numbers listed above for the FE20 for series #1 929s?
I thought all series #1s were MA20 not FE20?
My local supercheap (supershite) had 13A0750 listed for my Fan & Alt belt which was 10cm too small so I ordered 13A0760 which was about the same size also didn't fit.
In the end I got wise and just removed the belt and took the part # from it:mad:

bundo

  • Greasemonkey
  • Posts: 21
V Belts
« Reply #2 on: March 20, 2009, 11:32:40 AM »
OK quick question for a nuube

I want to take the Fan and pulley off my FE motor.

what belt do i use to just run the altinator?

spastk

  • Administrator
  • Needs to spend more time in the garage
  • Posts: 1443
    • MSN Messenger - aaron.barnes@hbcosmo.com
V Belts
« Reply #3 on: March 20, 2009, 10:09:03 PM »
I'd recommend measuring the length you will need with a piece of string and then taking that into the shop and getting a belt the same length ;)
[SPASTK] 1983 Mazda Cosmo Coupe