Author Topic: Robanthons FE (T)  (Read 3174 times)

Robanthon

  • Paid Member
  • Apprentice
  • Posts: 92
Re: Robanthons FE (T)
« Reply #30 on: March 21, 2010, 03:05:02 PM »
The manifold has arrived. Looks even better then on the pics. The weldingjob on it is awsome.

skj0lsvik

  • Paid Member
  • Fabricator
  • Posts: 467
  • Ü
    • MSN Messenger - sondre_skj0lsvik@hotmail.com
Re: Robanthons FE (T)
« Reply #31 on: March 21, 2010, 03:06:32 PM »
Awesome :D
I <3 HBCosmo!


atleladden

  • Greasemonkey
  • Posts: 22
Re: Robanthons FE (T)
« Reply #32 on: June 13, 2010, 09:33:12 PM »
Progress?:)

oilyFET

  • Garage Sweep
  • Posts: 13
Re: Robanthons FE (T)
« Reply #33 on: June 16, 2010, 10:18:09 AM »
what are manifolds made out of, not stainless ?         too much heat retention would it not I DUNNO

nice project whatever your doing                i have stock FET can someone give me an idea of what i need to do to get it back up to scratch other than the obvious         thanks                    soz to but in too

skj0lsvik

  • Paid Member
  • Fabricator
  • Posts: 467
  • Ü
    • MSN Messenger - sondre_skj0lsvik@hotmail.com
Re: Robanthons FE (T)
« Reply #34 on: January 20, 2011, 09:55:07 AM »
Come on Robert! Any progress?? :D
I <3 HBCosmo!


Robanthon

  • Paid Member
  • Apprentice
  • Posts: 92
Re: Robanthons FE (T)
« Reply #35 on: July 02, 2011, 09:44:26 AM »
Hi

The car is still missing its engine. Almost everything is ready, but due to the houseproject and the new familymember the car hasen`t been a priority latest year.
It will eventually be ready, but not this year i think.

If you need the books Sondre. I will post them to you.

Robert

Robanthon

  • Paid Member
  • Apprentice
  • Posts: 92
Robanthons FE (T)
« Reply #36 on: January 25, 2012, 09:32:39 PM »
Hi

After building a house and a twin garage in 2011 andhaving the fifth familymember in september 2011 im finally ready to start up the project again.

All the rust is now gone. All the parts are ready.  =)

jozey

  • Garage Sweep
  • Posts: 5
    • MSN Messenger - jozey_hall@hotmail.com
Nice one
« Reply #37 on: January 26, 2012, 01:29:33 AM »
Good on ya, i was just reading this and wondering what must of happened to you or your car but noticed the last post was from yesterday! I cannot wait to see how it turns out and congrats on the new family member, house and garage.  :cool:
18 yrs old, lives in nevada, usa for work and home is in adelaide, australia. Work is an apprentice licenced aviation maintainence engineer for WhisperJet Helicopters.

skj0lsvik

  • Paid Member
  • Fabricator
  • Posts: 467
  • Ü
    • MSN Messenger - sondre_skj0lsvik@hotmail.com
Re: Robanthons FE (T)
« Reply #38 on: January 30, 2012, 01:48:57 PM »
Good to see your not forgetting your HB Robert! Your car is a true inspiration to me.... Cannot wait to see how it's turning out with the new turboed engine.

Before you know it, I'm standing on your doorstep demanding a test-ride ;)
I <3 HBCosmo!


Robanthon

  • Paid Member
  • Apprentice
  • Posts: 92
Re: Robanthons FE (T)
« Reply #39 on: February 04, 2012, 03:24:39 PM »
A good an efficency day. Trailing arm right side mounted, new brake calipter, disc, brakeshield and pads on. Tomorrow ill hopefully have got the left side done.
« Last Edit: February 04, 2012, 03:45:35 PM by Robanthon »

Robanthon

  • Paid Member
  • Apprentice
  • Posts: 92
Re: Robanthons FE (T)
« Reply #40 on: February 28, 2012, 06:23:50 PM »
Ok. Lets see. All the rust has now been primed and painted under the car. Everything in the rear end is monted and ready. At the front the intercooler is mounted.